Module cảm biến hồng ngoại phát hiện vật cản 4 kênh

Modul cảm biến hồng ngoại phát hiện vật cản 4 kênh

4-way infrared detection system consists of multiple probes 4 + MPU 1 + DuPont line 18.

Specifications:

1. Operating Voltage: DC 3.3V-5V

2. Current: try to choose more than 1A power supply

3. Working temperature: - 10 ° C - + 50 ° C

4. Mounting Hole: M3 screws

5. detection distance: 1 mm to 60 CM adjustable, the closer the more stable performance, a white reflective distances.

6. Size: the control board 42mm × 38mm × 12 mm (length × width × height )

           Small plate forward 25 mm × 12mm × 12 mm (length × width × height )

7. Output interface: 6 wire interface (1234 to four signal outputs , + for the positive power supply , - the negative supply that is ground )

8. Output signal: TTL level (which can be directly connected to the microcontroller I / 0 number, reflected back to the sensor sensing infrared light , red light is on, the output low; when no infrared light , the light does not light, high power output level.)

Applications:

1. smart car or a robot hunt ( including black and white lines ) , walking path along the black line, also known as tracking.

2. Smart car to avoid the cliff, anti-fall.

3. Smart car to avoid obstacles

Invoice:

1 shown in Figure 1 set the tracking module (hollow plate a small plate forward + 4)

2 20cm DuPont line 18, to facilitate wiring

3 provide information on Download to download